What Is Meant By: ”Logo! Is In Run”?; Status Indication On The Display - Siemens Logo! Manual

AI:
7: 00000
8: 00000
Press
AQ:
1: 00000
2: 01000
Press
M:
0.. 123456789
1..0123456789
2..01234
Press
ESC+C
What is meant by: "LOGO! is in RUN"?
In RUN mode, LOGO! executes the circuit program. To do
so, LOGO! first reads the status at the inputs, determines
the status of the outputs by means of the user program,
and switches these on or off according to your settings.
This is how LOGO! indicates the I/O status:
I:
0.. 123456789
1..0123456789
2..01234
In this example, only the inputs I1, I15, Q8 and Q12 are set
"high".

Status indication on the display

LOGO! Manual
A5E00380835-01
Analog inputs AI7 to AI8
Analog outputs AQ1 to AQ2
Flags M1 to M9
Flags M10 to M19
Flags M20 to M24
4 cursor keys for manual inter-
vention in the circuit program
(ESC+key)
Input/output status is '1':
inverted
Input/output status is '0':
not inverted
Programming LOGO!
Q:
0.. 123456789
1..0123456
85