Siemens Logo! Manual page 78

Programming LOGO!
Here you can also move the ">" cursor by pressing
. Move the ">" cursor to "Edit.." (for editing, i.e. input) and
confirm with OK.
>Edit Prg
Edit Name
AQ in Stop
Memory?
Move the ">" cursor to "Edit Prg" (for editing the circuit
program) and confirm with OK. LOGO! now shows you the
first output:
You are now in programming mode. Press
lect the other outputs. Now start to edit your circuit pro-
gram.
Note
Because we have not yet saved a password for the circuit
program in LOGO!, you can directly enter editing mode.
When you select "Edit" after you have saved a password-
protected circuit program, you are prompted to enter a
password and to confirm it with OK. You can only edit the
program after you have entered the correct password (see
Chapter 3.7.5.).
70
The Edit menu of LOGO!
The first output of LOGO!
Q1
and
and to se-
LOGO! Manual
A5E00380835-01