Setup Of The Modular Logo!; Maximum Setup; Maximum Setup Of A Logo! With Analog Inputs; High-Speed/Optimal Communication Performance - Siemens Logo! Manual

2.1 Setup of the modular LOGO!

2.1.1 Maximum setup

Maximum setup of a LOGO! with analog inputs

(LOGO! 12/24 RC/RCo and LOGO! 24/24o)
LOGO! Basic, 4 digital modules and 3 analog modules
I1......I6, I7, I8 I9...I12
AI1, AI2
LOGO!
LOGO! Basic
DM 8
Q1...Q4 Q5...Q8 Q9...Q12 Q13...Q16
Maximum setup of a LOGO! without analog inputs
(LOGO! 24 RC/RCo and LOGO! 230 RC/RCo)
LOGO! Basic, 4 digital modules and 4 analog modules
I1 . . . . . . . . . . . I8 I9...I12
LOGO!
LOGO! Basic
DM 8
Q1...Q4 Q5...Q8 Q9...Q12

High-speed/optimal communication performance

For optimal and high-speed communication performance
between LOGO! Basic and the various modules, we
recommend you install the "digital modules first, then the
analog modules" (example above).
We recommend that you position the CM AS Interface on
the far right-hand side. (If the AS Interface voltage fails,
communication between the LOGO! system and the expan-
sion modules, which are arranged to the right of the LOGO!
CM AS Interface expansion module, is interrupted.)
LOGO! Manual
A5E00380835-01
I13...I16 I17...I20
LOGO! LOGO!
DM 8 DM 8
I13...I16 I17...I20 I21...I24
LOGO! LOGO! LOGO!
DM 8 DM 8 DM 8
Q13...
Q16
LOGO! installation and wiring
I21...I24
AI3, AI4 AI5, AI6 AI7, AI8
LOGO! LOGO! LOGO!
DM 8 AM 2 AM 2
AI1 , AI2 AI3, AI4 AI5, AI6 AI7, AI8
LOGO! LOGO!
AM 2 AM 2
LOGO!
AM 2
LOGO! LOGO!
AM 2 AM 2
19