Logo! With Solid-State Outputs; Requirements For Solid-State Outputs - Siemens Logo! Manual

LOGO! with solid-state outputs

LOGO! versions with solid-state outputs can be identified
by the fact that the letter R is missing from their type name.
The outputs are short circuit-proof and overload-proof. An
auxiliary load voltage supply is not necessary, because
LOGO! supplies the load voltage.

Requirements for solid-state outputs

The load connected to LOGO! must have the following
characteristics:
S
The maximum switched current is 0.3 A per output.
Connecting
This is how you connect the load to a LOGO! with
solid-state outputs:
Q1 M
Load: 24 V DC, 0.3 A max.
LOGO! Manual
A5E00380835-01
Q2 M
Load
LOGO! installation and wiring
DM8 24
Q5 M Q6 M
Load
41