Siemens Logo! Manual page 153

S
Up/down counter (actual value Cnt,
see Chapter 4.4.13).
Select the required function by means of the block number.
The timebase is configurable. For information on valid
ranges and parameter defaults, refer to Chapter 4.4.1.
Timing diagram
Trg
R
Q
T expires
a
The bold section of the timing diagram is also shown in the symbol of
the retentive on-delay.
Functional description
The 0 to 1 signal transition at input Trg triggers the current
time T
a
input Trg does not influence the time T
The output and the time T
at input R.
If retentivity is not set, output Q and the expired time are
reset after a power failure.
LOGO! Manual
A5E00380835-01
T
. Output Q is set when T
T
= T. A further signal at
a
.
a
are reset with the next 1 signal
a
LOGO! functions
145