Siemens Logo! Manual page 88

Programming LOGO!
A password may have a maximum length of 10 characters,
and consists only of uppercase letters (A to Z). Directly at
the LOGO!, the password can be assigned, edited or deac-
tivated only in the "Password" menu.
In the programming menu:
1. Move the ">" cursor to 'Password':
2. To confirm the 'Password':
Press
your letters. Because LOGO! only provides uppercase let-
ters for the password, you can quickly access to letters "at
the end" of the alphabet by using the
Press
Press
Let us assign the password "AA" to our first circuit pro-
gram. The display now shows:
Old:
No Password
New:
This procedure is the same as for entering the name of the
circuit program. Select "New" and enter:
3. Select " A":
4. To move to the next letter:
5. Select " A":
The display now shows:
Old:
No Password
New:
6. To confirm the password:
Your circuit program is now protected with the password
"AA", and you are returned to the programming menu.
80
or to move up and down the alphabet to select
once to select "Z"
twice to select "Y", etc.
Press or
Press OK
button:
Press
Press
Press
Press OK
LOGO! Manual
A5E00380835-01