Setting The Display Contrast; To Set The Tod And The Date In Programming Mode; To Set The Display Contrast In Parameter Assignment Mode; To Set The Display Contrast In Programming Mode - Siemens Logo! Manual

Hide thumbs Also See for Logo!:
Table of Contents

Advertisement

To set the TOD and the date in programming mode:

If you want to set the TOD and the date in programming
mode, select in the main menu 'Setup', then menus 'Clock'
and 'Set Clock'. You can now set the weekday and the
time as described earlier (as of step 8.).

5.2.2 Setting the display contrast

You can set the default value for the display contrast
S
in parameter assignment mode by means of the set
menu ("Contrast" menu item)
S
in programming mode by means of the setup menu
("Contrast" menu item).

To set the display contrast in parameter assignment mode:

1. Select parameter assignment mode (see Chapter 5.1.)
2. On the parameter assignment menu,
select 'Set..':
3. Confirm 'Set..':
4. Move the '>' cursor to 'Contrast':
5. Confirm 'Contrast':
LOGO! shows the following display:
Contrast
.... ....
6. To change the display contrast:
7. To confirm your entry:

To set the display contrast in programming mode:

If you want to set the display contrast in programming
mode, select in the main menu 'Setup', then menu 'Con-
trast'. You can now set the display contrast as described
earlier (as of step 6.).
LOGO! Manual
A5E00380835-01
+
Configuring LOGO!
Press
or
Press OK
Press
or
Press OK
Press
or
Press OK
243

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents