LOGO! program module (card)
Correlation between the password and the protective function
Password
–
Yes
–
Yes
Assigning a security function
To assign a circuit program and copy protection function to
the program module (card), open the programming mode
and select "Card".
1. Switch the LOGO! to programming mode (ESC / >Stop).
2. The main menu opens. To select the 'Card' command:
3. To apply you entry in 'Card':
4. Move the '>' cursor to 'CopyProtect': Press
5. To apply 'CopyProtect':
LOGO! shows the following display:
>No
Yes
CopyProtect:
No
The current protection setting is shown in the bottom line.
This function is disabled by default ("No": disabled).
248
Protec-
Editing
tion
–
Yes
–
Yes, with
password
Yes
No
Yes
Yes, with
password
Copying
Deleting
Yes
Yes
Yes
Yes, with
password
No
Yes
Yes, with
Yes, with
password
password
Press
or
Press OK
or
Press OK
LOGO! Manual
A5E00380835-01