Communication Modules; Certification And Approvals - Siemens Logo! Manual

Getting started with LOGO!

Communication modules

The following communication modules can be connected to
the LOGO!:
Symbol Name
LOGO! CM AS Inter-
face
LOGO! CM EIB/KNX 24 V AC/DC

Certification and approvals

LOGO! is certified to cULus and FM.
S
cULus Haz. Loc.
Underwriters Laboratories Inc. (UL) to
– UL 508 (Industrial Control Equipment)
– CSA C22.2 No. 142 (Process Control Equipment)
– UL 1604 (Hazardous Location)
– CSA-213 (Hazardous Location)
APPROVED for use in
Class I, Division 2, Group A, B, C, D Tx
Class I, Zone 2, Group IIC Tx
S
FM Approval
Factory Mutual Research (FM) to
Approval Standard Class Number 3611, 3600, 3810
APPROVED for use in
Class I, Division 2, Group A, B, C, D Tx
Class I, Zone 2, Group IIC Tx
Note
You will find current approvals on the rating plate of the
relevant module.
12
Power sup-
ply
24 V DC 4 virtual digital in-
puts (Q
of LOGO! Basic)
max. 16 virtual di-
gital inputs (I)
max. 8 virtual
analog inputs (AI)
Inputs
4 virtual digital
... Q outputs (I
n n+3
of LOGO! Basic)
max. 12 virtual di-
;
gital outputs (Q)
max. 2 virtual
analog outputs
(AA)
LOGO! Manual
A5E00380835-01
Outputs
... I
n n+3
;