Setting The Start Screen - Siemens Logo! Manual

Configuring LOGO!

5.2.3 Setting the start screen

You can select the default setting for the start screen of the
LOGO! in RUN mode:
S
in parameter assignment mode by means of the set
menu ("StartScreen" menu item).
To select the start screen:
1. Select parameter assignment mode (see Chapter 5.1.)
2. On the parameter assignment menu,
select 'Set..':
3. Confirm 'Set..':
4. Move the '>' cursor to 'StartScreen': Press
5. Confirm 'StartScreen':
LOGO! shows the following display:
>Clock
Input DI
StartScreen
Clock
The current setting of the start screen is shown in the bot-
tom row. The default setting is 'Clock'.
You can choose between the display of the current
time-of-day and date, or the values of the digital inputs:
6. Select the desired default setting:
7. To confirm your entry:
244
Press or
Press OK
or
Press OK
Press or .
Press OK
LOGO! Manual
A5E00380835-01