On-/Off-Times; Setting The Weekly Timer - Siemens Logo! Manual

On-/Off-times

Possible is any time between 00:00 h and 23:59 h.
––:–– means: No on-/off-times set.

Setting the weekly timer

To set the on-/off-times:
1. Move the cursor to one of the Cam parameters of the
timer (e.g. No1).
2. Press OK. LOGO! opens the Cam parameter assign-
ment screen form. The cursor is positioned on the week-
day.
3. Press
4. Press
on-time.
5. Set the on-time.
Modify the value at the respective position, using the
keys
tions, using the keys
can only select the value ––:––
(––:–– means: No on-/off-times set).
6. Press
off-time.
7. Set the off-time (in same way as in step 5).
8. Confirm your entries with OK.
The cursor is now positioned on the No2 parameter
(Cam2) and you can configure a further cam.
Note
For information on timer accuracy, refer to the technical
data and to Chapter 4.3.2.
LOGO! Manual
A5E00380835-01
and to select one or several weekdays.
to move the cursor to the first position of the
and . Move to the cursor to the various posi-
and . At the first position, you
to move the cursor to the first position of the
LOGO! functions
163