Summertime/Wintertime Conversion - Siemens Logo! Manual

Programming LOGO!
If you are sure that you want to delete the circuit program
from memory:
5. Move the '>' cursor to 'Yes':
6. Press OK.
Password?
ZZ
7. Enter your password.
8. Press OK. The circuit program is deleted.
Note
Although you may have forgotten your password, you can
still delete the circuit program by entering the wrong pass-
word four times.

3.7.13 Summertime/wintertime conversion

You can enable or disable automatic Summertime/winter-
time conversion
S
in parameter assignment mode by calling the "Set.."
menu command
S
in programming mode by calling the "Setup" menu com-
mand.
98
Press
To prevent unintentional deletion of
your circuit program, you are
prompted to enter your password
(provided you have assigned one).
or
LOGO! Manual
A5E00380835-01