Siemens Logo! Manual page 81

You will see an underscore below the Q in Q1, which is the
cursor. The cursor indicates your current position in the
circuit program. You can move the cursor by pressing the
, ,
moves to the left.
–
At this point you enter only the first (OR) block. Press OK
to select editing mode.
Co
The cursor no longer appears in the form of an underscore;
but instead as a flashing solid square. LOGO! offers you
here various options.
Select GF (basic functions) by pressing the
appears, and confirm with OK. LOGO! now shows the first
block from the list of basic functions:
LOGO! Manual
A5E00380835-01
and keys. Now press the
Q1
Q1
B1
&
Q1
Programming LOGO!
key. The cursor
The cursor indicates your current posi-
tion in the circuit program.
The cursor is displayed as a solid
square: You can now select a connec-
tor or a block
The AND is the first block of the basic
functions list. The solid square cursor
prompts you to select a block.
key until GF
73