Which Communication Modules Are Available?; Getting Started With Logo - Siemens Logo! Manual

Which communication modules are available?

S
LOGO! communication module (CM) AS interface, that
is described in more detail in a separate documentation.
The communication module has four virtual inputs and
outputs, and acts as an interface between an
AS-Interface system and a LOGO! system. The module
enables four data bits to be transferred from the
LOGO! Basic to the AS-Interface system and vice versa.
S
LOGO! communication module (CM) EIB/KNX, that is
described in more detail in a separate documentation.
CM EIB/KNX is a communication module (CM) for
connecting the LOGO! to the EIB. It is implemented as a
slave module for the logic module LOGO! (12/24 or
115/240 V).
The CM EIB/KNX is a bus device on the EIB and
enables the LOGO! to communicate with other EIB
devices through the exchange of EIB data points.
It transfers EIB data points to the LOGO! and LOGO!
functions to the EIB.
CM EIB/KNX makes the current states of the configured
EIB data points available to the LOGO! so that it is able
to link them with its logic functions and timing elements.
The EIB data points can thus also be linked with those
of the local LOGO! inputs and outputs. The CM
EIB/KNX then transfers each change in the status of the
output signals on the EIB.
The combination of the LOGO! and CM EIB/KNX
provides the user with a distributed controller
functionality for the EIB with the possibility of carrying
out settings or modifying parameters or logic operations
quickly, simply and without a programming device.
It's your choice
The various LOGO! Basic versions, expansion modules
and communication modules offer you a highly flexible and
adaptive system to suit your specific tasks.
LOGO! Manual
A5E00380835-01

Getting started with LOGO!

3