Switching Logo! To Run Mode; Display Field Of The Logo! In Run Mode - Siemens Logo! Manual

Programming LOGO!

3.7.6 Switching LOGO! to RUN mode

In the main menu, select RUN to start LOGO!.
1. To return to the main menu:
2. Move the '>' cursor to 'Start':
3. To confirm 'Start':
LOGO! runs the circuit program and shows the following
display:

Display field of the LOGO! in RUN mode

Mo 09:00
2005-01-27
Press
I:
0.. 123456789
1..0123456789
2..01234
Press
Q:
0.. 123456789
1..0123456
Press
AI:
1: 00000
2: 01000
3: 00253
Press
AI:
4: 00010
5: 00000
6: 00005
Press
84
Press ESC
Press
Press OK
Start screen: Date and current time-of-
day (only for versions with real-time
clock). This element flashes if the date
and time are not set.
Or: Start screen digital inputs (see
Chapter 5.2.3)
Inputs I1 to I9
Inputs I10 to I19
Inputs I20 to I24
Outputs Q1 to Q9
Outputs Q10 to Q16
Analog inputs AI1 to AI3
Analog inputs AI4 to AI6
or
LOGO! Manual
A5E00380835-01