Connecting Outputs; Requirements For Relay Outputs - Siemens Logo! Manual

LOGO! installation and wiring

2.3.3 Connecting outputs

LOGO! ...R...
The LOGO! ...R... version is equipped with relay outputs.
The potential of the relay contacts is isolated from the
power supply and the inputs.

Requirements for relay outputs

You can connect various loads to the outputs, e.g. lamps,
fluorescent lamps, motors, contactor relays etc. For
information on the properties required for the loads
connected to the LOGO! ...R..., refer to Appendix A.
Connecting
This is how you connect the load to LOGO! ...R...:
1
Q1
Protection with automatic circuit-breaker, max. 16 A, characteristics
B16, e.g.: Power circuit-breaker 5SX2 116-6 (if required)
40
2 1 2
Q2
Load
DM8...R
2 1 2
1
Q5 Q6
Load
A5E00380835-01
LOGO! Manual