Logo! Program Module (Card) - Siemens Logo! Manual

6 LOGO! program module (card)

LOGO! allows you to store only one circuit program in its
memory. If you want to modify the circuit program or create
a further one without deleting the first, you must archive it
somewhere. One of the options is to use a program mod-
ule/card.
The circuit program stored in LOGO! can be copied to a
program module (card). You can then insert the program
module/card in another LOGO! to copy the circuit program.
using the program module (card), you can:
S
Archiving circuit programs
S
Reproducing circuit programs
S
Send circuit programs by mail
S
Write and test your circuit program at the office, and
then transfer it to a LOGO! in the switching cabinet.
LOGO! is supplied with a hood. The program module (card)
is supplied separately.
Note
You do not need a module to backup the circuit program in
your LOGO!.
The LOGO! circuit program is automatically stored in non-
volatile memory when you exit the programming mode.
We shall now introduce the program module (Card) you
can order for LOGO! The card can backup all data in the
LOGO! circuit program memory.
The order number is found in the appendix.
LOGO! Manual
A5E00380835-01
245