Siemens Logo! Manual page 4

Preface
Valid range of this manual
The manual applies to devices of series 0BA5.
Changes compared to previous releases of the manual
S
The digital modules LOGO! DM16 24, DM16 24R and DM16
230R were added.
S
The analog module LOGO! AM 2 AQ was added.
S
The communication modules CM EIB/KNX and CM AS
interface were added.
S
Description of changes and new features of the series 0BA5
devices.
Main differences compared to previous devices (0BA0 to 0BA4)
S
Display contrast may be changed
S
Default setting for the start screen may be changed
New features of the current devices (0BA5)
S
The "Analog ramp" special function enables you to use a
two-step speed control.
S
The "Analog multiplexer" special function enables you to select
1 of 4 analog values to be output.
S
The "PI controller" special function enables you to use a PI
controller function.
Additional support
At our Internet address
http://www.siemens.com/logo
you can quickly and easily find answers to your queries about
LOGO!.
You can reach Technical Support as follows:
Phone:
Fax:
E-Mail:
ii
+49 (0)180 5050-222
+49 (0)180 5050-223
adsupport@siemens.com
LOGO! Manual
A5E00380835-01