Inserting And Removing The Program Module (Card) - Siemens Logo! Manual

LOGO! program module (card)
6.2 Inserting and removing the program
module (card)
When you remove a program module (card) with circuit
program and copy protection attribute, note the following:
The circuit program stored on the program module (card)
can only be executed if the card remains inserted during
system runtime.
After you have removed the program module (card),
LOGO! outputs the message'No Program'. A removal of
the program module (card) during RUN will lead to imper-
missible operating states.
Always heed the following warning:
!
Warning
Do not touch the open slot of the program module (card)
neither with your fingers, nor with a metallic or conductive
object.
The program module (card) socket may be under voltage if
the polarity is reversed at L1 and N by accident.
The program module (card) may only be removed by quali-
fied personnel.
250
LOGO! Manual
A5E00380835-01