Microscan MS-710 User Manual page 162

Saving
Power-on settings are those that are saved by a
loaded into active memory whenever power to the scanner is recycled.
Save Active Settings, except Factory, for Power-on
• Initializes serial configuration commands into
active memory and resets counters to zero.
• Saves all current settings except factory settings
to user-saved settings for power-on.
By Software Command
Send <Z> command to the scanner.
By ESP
Right-click in the configuration window and select
Save to Reader, then Send and
Note: Allow a 1 second delay after sending the <Z> command before resuming opera-
tions.
Save Only Factory Settings for Power-on
• Initializes serial configuration commands in
active memory and resets counters to zero.
• Saves all factory settings for power-on (factory
settings include but are not limited to Focus,
Gain, Tracking, and Scan Speed).
By Serial Command
Send <Zp> command to the scanner.
By ESP
Right-click in the configuration window and select
Save, Including Factory.
Note: Allow a 1 second delay after sending the <Z> command before resuming opera-
tions.
MS-710 Scanner User's Manual
A-22
<Z> or <Zp> command and are
< >
Z
User-Saved
Settings
Save.
< >
Zp
Factory Settings
User-Saved
Settings
Save to Reader,
Initialize
Active
Memory
Microscan
Defaults
Initialize
Microscan
Defaults
then Send and