I/O Parameters By Esp; I/O Parameters By Serial Command - Microscan MS-710 User Manual

I/O Parameters by ESP

I/O Parameters by ESP

Click this button to
bring up the I/O
Parameters menu.
To change a setting,
double-click the
setting and use your
cursor to scroll
through the options.

I/O Parameters by Serial Command

Command Title
Symbol Data Output <Kl symbol data output mode,when to output>
Noread Message <Kk status,message>
Bad Symbol Message <KM status,message>
status,message>
No Symbol Message <KN
a
No Object Message <KO status,message>
Laser ON/OFF Status <KClaser on/off status>
Beeper <Ku status
Partial Output <KY status,start postion,length>
Serial Verification <KS command echo status,beep status,control/hex output>
Output 1 <Kvoutput on,active state,pulse width,number to output on>
Output 2 <Kwoutput on,active state,pulse width,number to output on>
Output 3 <K'output on,active state,pulse width,number to output on>
a. For MS-710s with MS-Sensors.
MS-710 Scanner User's Manual
6-2
Format
,
volume>