Table of Contents
Advertisement
Match Length
Match Length
Usage:
For example, if Match Length is set to 6 in a 10 character symbol, and
Match Start Position is set for 2, only the 2nd through 7th characters
(from left to right) will be compared.
Definition:
Defines the length of the character string that will be compared with that
of the master symbol when Match Start Position is set to 1 or greater.
When Match Start Position is set to 0, no comparison will occur.
Serial Cmd:
<Knmatchcode type,sequential matching,match start position,
match
length,wild card,sequence on noread,sequence on mismatch>
Default:
1
Options:
1 to 31
Wild Card
Usage:
For example, with Wild Card character defined as the default asterisk,
defining
CR*34
CR234, but not CR2345. Entering the wild card at the end of the master
symbol as in
CR*
as CR1, CR23, CR358, etc.
Definition:
Wild Card character allows a user to define a wild card character as part
of the master symbol.
Serial Cmd:
<Knmatchcode type,sequential matching,match start position,
match
length,wild
Default:
*
(asterisk)
Options:
Any valid ASCII character
MS-710 Scanner User's Manual
7-6
as the master symbol will result in matches for CR134,
will result in matches for variable symbol lengths such
card,sequence on noread,sequence on mismatch>
Advertisement
Table of Contents
Need help?
Do you have a question about the MS-710 and is the answer not in the manual?
Questions and answers