Send/Receive Options - Microscan MS-710 User Manual

Send/Receive Options

To access save and receive options, from the
Send/Recv button:
You can also access this selector by right-clicking in any of the configuration views.
Saving
You have 3 choices for saving:
1. Send, No Save.
This saves ESP settings to current
memory.
2. Send and Save.
This activates all changes in current
memory and saves to the scanner for power-on. (Similar to the <Z> command.)
3. Send and Save, Including Factory.
factory settings.
For Multidrop setup, see "Multidrop Communications" on page
For Matchcode setup, see Chapter 7, "Matchcode."
For more on defaulting and saving settings, see
page A-20.
Receiving
From the Send/Recv selector select
This is useful if you want to receive (upload) the scanner's settings and save them as a
computer file for later retrieval and to verify that your ESP settings have been saved or
that you have not saved any unwanted changes that you or someone else previously
made in ESP.
Defaulting
When you select Default Current... or Default all ESP... you are only defaulting the
ESP settings. To default the scanner, see
A-21 for a more information.
VS-310 Scanner User's Manual
Chapter 2 Using ESP
Configuration views click the
Includes all settings including changes to
A-29.
"Defaulting/Saving/Initializing" on
Receive Reader Settings.
"Defaulting/Saving/Resetting" on page
2-7