Microscan MS-710 User Manual page 152

Table A-7 Complete List of Serial Configuration Commands
Command Title
Transition Counter <KHsymbol detect status,transition counter,reflectance threshold>
Scanner Type <KPdensity>
<Kpstatus,check digit status,check digit output status,large inter-
Code 39
character gap,fixed code length status,fixed code length>
<Kt
EAN-128 status,output format,application record separator status,appli-
Code 128
cation record separator character,application record brackets,applica-
tion record padding>
<Krstatus,check digit status,check digit output,symbol length
Interleaved 2 of 5
1,symbol length 2>
<Kqstatus,start & stop match status,start & stop output sta-
Codabar tus,large intercharacter gap,fixed symbol length status,symbol
length,check digit type,check digit output>
<KsUPCstatus,EAN status,supplementals status,separator sta-
UPC/EAN
tus,separator character>
Narrow Margins/
<Konarrow margins,symbology identifier status>
Symbology Identifier
Background Color <Kxbackground color>
Symbol Data Output <Klsymbol output status,when to output>
Noread Message <Kkstatus,message>
Bad Symbol Message <KMstatus,message>
No Symbol Message <KNstatus,message>
a
No Object Message <KOstatus,message>
Laser On/Off Status <KClaser on/off status>
Beeper <Kustatus,volume>
Partial Output <KYstatus,start postion,length>
Serial Verification <KScommand echo status,command beep status,control/hex output>
<Knmatchcode type,sequential matching,match start position,
Matchcode match length,wild card character,sequence on noread,sequence on mis-
match>
New Master Pin <Kzstatus>
a. For MS-710s with MS-Sensors.
MS-710 Scanner User's Manual
A-12
Format
SYMBOLOGIES
code 128 status,fixed symbol length status,symbol length,UCC/
I/O PARAMETERS
MATCHCODE