Microscan MS-710 User Manual page 128

Read Rate
Enable Extended Rate Test for Single and Multisymbol
Sending <Ce> after <C> or
both single and multiple symbols.
Extended mode instructs the scanner to output the decode rate, the symbol data, and
the transition data.
Symbol Information
Decode rate
Note: Example shows output when Postamble is enabled
and defined as a carriage return and a line feed.
Note: The <Ce> command has no immediate effect if not preceded by <C> or
End Read Rate Test
Sending <J> ends both the Percent test and the Decodes/Second test for both sin-
gle and multi-symbol.
MS-710 Scanner User's Manual
9-6
<Cs> will generate a an extended mode that applies to
Number of symbol
bar and space
transitions
<Cs>.