New Master Pin - Microscan MS-710 User Manual

New Master Pin

Usage: Some applications require the line worker to change the master symbol.
This can be done by installing a switch at the location of the scanner. It is
very common to have a keyed switch so that accidental switching does
not occur.
Definition: After New Master Pin is enabled, a pulse can be received on the new
master pin which will cause the scanner to record the next decoded sym-
bol symbol(s) as the new master symbol(s).
It is important to note that the enabling New Master Pin does not in
itself cause a master symbol to be recorded. The master pin must then
be activated momentarily (for a minimum of 10 ms) before a master
symbol can be scanned into memory. (See
on page A-5.)
Serial Cmd: <Kzstatus>
Default: Disabled
Options: 0 = Disabled
MS-710 Scanner User's Manual
Chapter 7 Matchcode
"Electrical Specifications"
1 = Enabled
7-9