Step 6 Position Symbol And Scanner; Figure 1-3 Symbol/Scanner Position - Microscan MS-710 User Manual

Step 6 — Position Symbol and Scanner
1. Set up a bar code symbol
2
application.
2. Avoid bright light or IR light from other sources, including other scanners.
3. Pitch symbol or scanner a minimum of ±15° to avoid specular reflection, the
return of direct, non-diffused light.
Skew
axis
Bar code
label
Scanner

Figure 1-3 Symbol/Scanner Position

Code 39 is the default symbol type enabled. If you are uncertain as to your symbology
type, enable all codes (see "Autodiscriminate" on page
1. If using an I 2/5 symbol, verify that the number of characters in the symbol being scanned
matches the symbol length enabled for the I 2/5 symbol type (default is 10 and 6). See
leaved 2 of 5" on page 5-7.
2. Consult "LED Indicators" on page
MS-710 Scanner User's Manual
1
at the scanning distance you will be using in your
Tilt
axis
Pitch
axis
Scan line
5-17).
A-3.
Chapter 1 Quick Start
"Inter-
1-7