Table of Contents
Advertisement
Postamble
Postamble
Postamble Status
Usage:
Used for identifying and controlling incoming data. For example, defining
the postamble as a carriage return and a line feed causes each decoded
message to be displayed of on its own line.
Definition:
Defines a one- or two character data string that can be added to the end
of the decoded data.
Serial Cmd:
<Kestatus,postamble character(s)>
Default:
Enabled
Options:
0 = Disabled
Postamble Character(s)
Serial Cmd:
<Kestatus,postamble
Default:
^M^J. Corresponds to carriage return/line feed/null/null, as displayed in
the menu.
Options:
Up to two user-defined ASCII characters, including control characters.
Within a Serial Command
To enter control characters within a serial command, hold down the con-
trol key while typing the desired character.
Example:
<K140,CNTL-m CNTL-j>
Within an Embedded Menu
Control characters entered on the command line are displayed in the
menu as mnemonic characters, such as: <CR><LF><NUL><NUL>
To enter a control character from within an embedded menu, first type in
a space (with the space key). This has the effect of allowing the control
key to be recognized as a part of the control character. Next hold down
the control key while typing the desired character.
Example:
Space CNTL-m Space CNTL-j
MS-710 Scanner User's Manual
3-18
1 = Enabled
character(s)>
to enter ^M^J.
to enter ^M^J.
Advertisement
Table of Contents
Need help?
Do you have a question about the MS-710 and is the answer not in the manual?
Questions and answers