Table of Contents
Advertisement
Polarity
Definition:
Sets the polarity of the discrete output.
Serial Cmd:
<Kvoutput on,polarity,pulse width,number to output on>
Default:
Negative
Options:
0 = Negative
Pulse Width
Definition:
Sets the time in 10 mS increments that the discrete output remains active.
Serial Cmd:
<Kvoutput
on,polarity,pulse
Default:
5
(.05 seconds). Corresponds to 50 mS displayed in the menu.
Options:
1 to 255 (0.01 to 2.55 seconds). Divide the number entered on the com-
mand line by 100 for time in seconds.
Number to Output On
Definition:
Sets the number of events (matches, mismatches, noreads, etc. as con-
figured by Output On) that must occur before activating the associated
output.
Serial Cmd:
<Kvoutput on,polarity,pulse
Default:
1
Options:
0 to 255
Note: The number of matches, etc. for this setting does not need to be sequential.
MS-710 Scanner User's Manual
Chapter 6 I/0 Parameters
1 = Positive
width,number to output on>
width,number to output
on>
6-17
Advertisement
Table of Contents
Need help?
Do you have a question about the MS-710 and is the answer not in the manual?
Questions and answers