Super; Super Authentication-Mode - H3C S5830V2 Command Reference Manual

•
display role feature-group
•
role

super

Use super to obtain another user role without reconnecting to the device.
Syntax
super [ rolename ]
Views
User view
Predefined user roles
network-admin
Parameters
rolename: Specifies a user role, a case-sensitive string of 1 to 63 characters. The user role must
exist in the system. If you do not specify a user role, you obtain the default target user role.
Usage guidelines
The obtained user role is a temporary user role, because this command is effective only on the
current login. The next time you are logged in with the user account, the original user role settings
take effect.
To enable users to obtain another user roles without reconnecting to the device, you must configure
user role authentication.
•
If no local password is configured in the local password authentication (local), an AUX user can
obtain user role authorization by either entering a string or not entering anything.
•
If no local password is configured in the local-then-remote authentication (local scheme), the
following rules apply:
A VTY user performs remote authentication.
An AUX user can obtain user role authorization by either entering a string or not entering
anything.
Examples
# Obtain the user role network-operator.
<Sysname> super network-operator
Password:
User privilege role is network-operator, and only those commands can be used that authorized
to the role.
Related commands
•
authentication super (Security Command Reference)
•

super authentication-mode

•
super password
super authentication-mode
Use super authentication-mode to set an authentication mode for temporary user role
authorization.
Use undo super authentication-mode to restore the default.
65