Display Boot-Loader Pex - H3C S5830V2 Command Reference Manual

<Sysname> display boot-loader
Software images on slot 0:
Current software images:
flash:/simware-cmw710-boot-a1701.bin
flash:/simware-cmw710-system-a1701.bin
Main startup software images:
flash:/simware-cmw710-boot-a1701.bin
flash:/simware-cmw710-system-a1701.bin
flash:/simware-cmw710-ssh-a1701.bin
Backup startup software images:
flash:/simware-cmw710-boot-a1701.bin
flash:/simware-cmw710-system-a1701.bin
Table 21 Command output
Field
Software images on slot slot-number
Current software images
Main startup software images
Backup startup software images
Related commands
boot-loader file

display boot-loader pex

Use display boot-loader pex to display PEX startup software images stored on the parent fabric.
Syntax
display boot-loader pex [ pex-model ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
pex-model: Specifies a PEX model, a case-insensitive string of 1 to 63 characters. You must enter
the complete PEX model name. For available PEX models, enter a question mark (?) for the
pex-model argument. If you do not specify a PEX model, the system displays all PEX startup
software images on all parent devices.
Usage guidelines
Use this command to identify the startup software images on the parent fabric for a PEX model.
PEXs always start up with the software images on the master device. To guarantee that the PEXs
load the correct software when a master/subordinate switchover occurs, make sure the PEX startup
software images are the same across all parent devices.
Description
This field displays the Comware images on the IRF member
device. The slot number represents the device's member ID.
Comware images that have been loaded.
Main Comware images for the next startup.
Backup Comware images for the next startup.
162