H3C S5830V2 Command Reference Manual page 240

Syntax
copyright-info enable
undo copyright-info enable
Default
Copyright statement display is enabled.
Views
System view
Predefined user roles
network-admin
Examples
# Enable copyright statement display.
<Sysname> system-view
[Sysname] copyright-info enable
•
When a Telnet user logs in, the following statement appears:
**************************************************************************
* Copyright (c) 2004-2014 Hangzhou H3C Tech. Co., Ltd. All rights reserved.*
* Without the owner's prior written consent,
* no decompiling or reverse-engineering shall be allowed.
****************************************************************************
<Sysname>
•
When a console user quits user view, the device automatically restarts the console session and
displays the following message:
**************************************************************************
* Copyright (c) 2004-2014 Hangzhou H3C Tech. Co., Ltd. All rights reserved.*
* Without the owner's prior written consent,
* no decompiling or reverse-engineering shall be allowed.
****************************************************************************
User interface aux0 is available.
Press ENTER to get started.
# Disable copyright statement display.
<Sysname> system-view
[Sysname] undo copyright-info enable
•
When a Telnet user logs in, the user view prompt appears:
<Sysname>
•
When a console user quits user view, the following message appears:
User interface aux0 is available.
Press ENTER to get started.
228
*
*
*
*