Flow-Control - H3C S5830V2 Command Reference Manual

You can execute this command multiple times, but only the most recent configuration takes effect. To
view the current shortcut key definition, use the display current-configuration command.
This command is available in both user line view and user line class view. A non-default setting in
either view takes precedence over a default setting in the other view. A non-default setting in user
line view takes precedence over a non-default setting in user line class view.
Examples
# Define character a as the shortcut key for terminating a task.
<Sysname> system-view
[Sysname] line aux 0
[Sysname-line-aux0] escape-key a
To verify the configuration:
1. Ping IP address 192.168.1.49, specifying the -c keyword to set the number of ICMP echo
request packets to 20.
<Sysname> ping -c 20 192.168.1.49
PING 192.168.1.49: 56
Reply from 192.168.1.49: bytes=56 Sequence=1 ttl=255 time=3 ms
Reply from 192.168.1.49: bytes=56 Sequence=2 ttl=255 time=3 ms
2. Press a.
The task is terminated, and the system returns to user view.
--- 192.168.1.49 ping statistics ---
2 packet(s) transmitted
2 packet(s) received
0.00% packet loss
round-trip min/avg/max = 3/3/3 ms
<Sysname>

flow-control

Use flow-control to configure the flow control mode.
Use undo flow-control to restore the default.
Syntax
flow-control { hardware | none | software }
undo flow-control
Default
The flow control mode is none.
Views
User line view
Predefined user roles
network-admin
Parameters
hardware: Performs hardware flow control.
none: Disables flow control.
software: Performs software flow control.
data bytes, press a to break
23