Install Remove; Install Rollback To - H3C S5830V2 Command Reference Manual

Related commands
•
display install active
•
display install inactive

install remove

Use install remove to remove inactive software images.
Syntax
install remove [ slot slot-number ] { filename | inactive }
Views
User view
Predefined user roles
network-admin
Parameters
slot slot-number: Specifies an IRF member device by its member ID or specifies a PEX that has
storage media by its virtual slot number. On an IRF fabric, this command deletes inactive software
images from all member devices if you do not specify a member device. On an IRF 3 system, this
command deletes inactive software images from all parent devices and all PEXs with storage media
if you do not specify a parent device or PEX.
filename: Specifies the name of a .bin file in the root directory of a storage medium on the master, in
the storage-medium:/base-filename.bin format. It can be a case-insensitive string of up to 63
characters and cannot contain slot information.
inactive: Removes all inactive software image files in the root directories of the specified storage
media.
Usage guidelines
This command deletes only inactive software image files saved in the root directories of the specified
storage media.
Removing a software image deletes the image file from the device permanently. You cannot use the
install rollback to command to revert the operation, or use the install abort command to abort the
operation.
Examples
# Remove inactive software image file flash:/ssh-feature.bin.
<Sysname> install remove flash:/ssh-feature.bin
# Remove inactive patch package flash:/ssh-patch.bin.
<Sysname> install remove flash:/ssh-patch.bin

install rollback to

Use install rollback to to roll back the software to an earlier rollback point.
Syntax
install rollback to { point-id | original }
Views
User view
189