Display Scheduler Logfile - H3C S5830V2 Command Reference Manual

Predefined user roles
network-admin
network-operator
Parameters
job-name: Specifies a job by its name, a case-sensitive string of 1 to 47 characters. If you do not
specify this option, the command displays all jobs' configuration information.
Examples
# Display all jobs' configuration information.
<Sysname> display scheduler job
Job name: saveconfig
copy startup.cfg backup.cfg
Job name: backupconfig
Job name: creat-VLAN100
system-view
vlan 100
// The output shows that the device has three jobs: the first has one command, the second has no
command, and the third has two commands. Jobs are separated by blank lines.

display scheduler logfile

Use display scheduler logfile to display log information for executed jobs.
Syntax
display scheduler logfile
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display job execution log information.
<Sysname> display scheduler logfile
Logfile Size: 1902 Bytes.
Job name
Schedule name
Execution time
Completion time : Tue Dec 27 10:44:47 2011
--------------------------------- Job output -----------------------------------
<Sysname>system-view
System View: return to User View with Ctrl+Z.
[Sysname]interface range ten-gigabitethernet 1/0/1 to ten-gigabitethernet 1/0/3
[Sysname-if-range]shutdown
: shutdown
: shutdown
: Tue Dec 27 10:44:42 2011
243