Job 1 completed successfully at 01/01/2011 04:53:46.
Detail of activating packages on slot 1.
Got upgrade policy successfully.
----------------------------------------------------------------------
Install job 2 started by user admin at 01/01/2011 04:55:23.
Job 2 completed successfully at 01/01/2011 04:55:29.
Detail of activating packages on slot 1.
Got upgrade policy successfully.
Detail of activating packages on slot 1.
Updated active package list successfully.
Detail of activating packages on slot 1.
Set startup software images successfully.
Detail of activating packages on slot 1.
Start ISSU Reboot successfully.
Related commands
reset install log-history oldest
display install package
Use display install package to display software image file information.
Syntax
display install package { filename | all } [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
filename: Specifies the name of a .bin file in the root directory of a storage medium on an IRF
member device, in the [slotn#]storage-medium:/base-filename.bin format. The slotn# section is
optional if the file is on the master. The storage-medium:/base-filename.bin section can have a
maximum of 63 characters.
all: Specifies all software image files in the root directories of the master's storage media.
verbose: Displays detailed information. If you do not specify this keyword, the command displays
only basic software image information.
Examples
# Display information about software image file system.bin.
<Sysname> display install package flash:/system.bin
flash:/system.bin
[Package]
173