H3C S5830V2 Command Reference Manual page 181

Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Specifies an IRF member device by its member ID or specifies a PEX by its virtual
slot number. On an IRF fabric, this command displays information for all member devices if you do
not specify a member device. On an IRF 3 system, this command displays information for all IRF
member devices and PEXs if you do not specify an IRF member device or PEX.
verbose: Displays detailed information. If you do not specify this keyword, the command displays
only the names of the software images.
Usage guidelines
After you execute the install commit command, use the display install committed command to
verify that the main startup image list has been updated with the software image change.
Both the install commit and boot-loader file commands modify the main startup software image
list.
For more information about main and backup startup images, see Fundamental Configuration
Guide.
Examples
# Display the main startup software images.
<Sysname> display install committed
Committed packages on slot 1:
flash:/boot-a0201.bin
flash:/system-a0201.bin
flash:/system-patch.bin
# Display detailed information about main startup software images.
<Sysname> display install committed verbose
Committed packages on slot 1:
flash:/boot-a0201.bin
[Package]
Vendor: H3C
Product: xxxx
Service name: boot
Platform version: 7.1.022
Product version: Beta 1330
Supported board: mpu
[Component]
Component: boot
Description: boot package
flash:/system-a0201.bin
[Package]
Vendor: H3C
Product: xxxx
Service name: system
169