Screen-Length - H3C S5830V2 Command Reference Manual

[Sysname-line-class-vty] protocol inbound ssh
[Sysname-line-class-vty] line vty 0 4
[Sysname-line-vty0-4] authentication-mode none
To verify the configuration:
1. Telnet to the device.
<Client> telnet 192.168.1.241
Trying 192.168.1.241 ...
Press CTRL+K to abort
Connected to 192.168.1.241 ...
******************************************************************************
* Copyright (c) 2004-2014 Hangzhou H3C Tech. Co., Ltd. All rights reserved.
* Without the owner's prior written consent,
* no decompiling or reverse-engineering shall be allowed.
******************************************************************************
<Server>
You are logged in without authentication.
2. Display online CLI user information.
<Server> display users
Idx
+ 50
Following are more details.
VTY 0
+
F
The output shows that you are using VTY 0. The configuration in user line view is effective.

screen-length

Use screen-length to set the maximum number of lines to be displayed on a screen.
Use undo screen-length to restore the default.
Syntax
screen-length screen-length
undo screen-length
Default
Up to 24 lines are displayed on a screen.
Views
User line view, user line class view
Predefined user roles
network-admin
Line Idle
VTY 0 00:00:00
:
Location: 192.168.1.186
: Current operation user.
: Current operation user works in async mode.
Time Pid
Jan 17 15:29:27 189
32
Type
TEL
*
*
*