H3C S5830V2 Command Reference Manual page 32

Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
number1: Specifies the absolute number of a user line, in the range of 0 to 192.
aux: Specifies the AUX line.
vty: Specifies the VTY line.
number2: Specifies the relative number of a user line. The value range is 0 to 128 for the AUX line
and 0 to 63 for the VTY line.
summary: Displays summary information about user lines. If you do not specify this keyword, the
detailed information is displayed.
Usage guidelines
This command is an older version reserved for backward compatibility purposes. As a best practice,
use the display line command.
Examples
# Display user line information.
<Sysname> display user-interface 0
Idx Type
0 AUX 0
+ : Line is active.
F : Line is active and in async mode.
Idx : Absolute index of line.
Type : Type and relative index of line.
Auth : Login authentication mode.
Int : Physical port of the line.
A : Authentication use AAA.
N : No authentication is required.
P : Password authentication.
Table 3 Command output
Field Description
Whether the modem allows calling in or out. By default, this attribute is not configured and a
Modem
hyphen (-) is displayed.
# Display summary information about all user lines.
<Sysname> display user-interface summary
Line type : [AUX]
...
112:XXXX XXXX XXXX XXXX
Line type : [VTY]
129:UUXX XXXX XXXX XXXX
...
Tx/Rx Modem Auth
9600 -
0:UXXX XXXX XXXX XXXX
Int
N -
20