Debug - H3C S5830V2 Command Reference Manual

ftp> close
221-Goodbye. You uploaded 0 and downloaded 0 kbytes.
221 Logout.
ftp>
Related commands
disconnect

debug

Use debug to enable or disable FTP client debugging.
Syntax
debug
Default
FTP client debugging is disabled.
Views
FTP client view
Predefined user roles
network-admin
Usage guidelines
When FTP client debugging is enabled, executing this command disables FTP client debugging.
When FTP client debugging is disabled, executing this command enables FTP client debugging.
Examples
# Enable and then disable FTP client debugging.
ftp> debug
Debugging on (debug=1).
ftp> debug
Debugging off (debug=0).
# When the device acts as the FTP client, enable FTP client debugging and download file a.txt from
the current directory of the FTP server.
ftp> debug
Debugging on (debug=1).
ftp> get a.txt
local: a.txt remote: a.txt
---> EPRT |2|8::124|50198|
200 PORT command successful
---> RETR a.txt
150 Connecting to port 50198
226 File successfully transferred
1569 bytes received in 0.0104 seconds (147.2 kbyte/s)
Table 11 Command output
Field
---> EPRT |2|8::124|50198|
Description
FTP command.
•
2—IPv6 (1 for IPv4).
82