H3C S5830V2 Command Reference Manual page 117

Usage guidelines
This command takes effect only for the current session. When you log in again, the command
restores to the default setting.
Examples
# Disable the device from displaying detailed information about FTP operations.
ftp> verbose
Verbose mode off.
# Execute the get command.
ftp> get a.cfg 1.cfg
# Enable the device to display detailed information about FTP operations.
ftp> verbose
Verbose mode on.
# Execute the get command.
ftp> get a.cfg 2.cfg
227 Entering Passive Mode (192,168,1,58,68,14)
150-Accepted data connection
150 The computer is your friend. Trust the computer
226 File successfully transferred
3796 bytes received in 0.00762 seconds (486.5 kbyte/s)
?
Use ? to display all commands supported by an FTP client.
Use ? command-name to display the help information for a command.
Syntax
? [ command-name ]
Views
FTP client view
Predefined user roles
network-admin
Parameters
command-name: Specifies a command supported by the FTP client.
Usage guidelines
In FTP client view, entering ? is the same as executing the help command.
Examples
# Display all commands supported by the FTP client.
ftp> ?
Commands may be abbreviated.
append
ascii
binary
bye
cd
Commands are:
delete ls
debug mkdir
dir newer
disconnect open
get passive
quit
reget
rstatus
rhelp
rename
105
rmdir
status
system
user
verbose