License Activation-File Uninstall - H3C S5830V2 Command Reference Manual

Views
System view
Predefined user roles
network-admin
Parameters
file-name: Specifies the file name, a case-sensitive string of 1 to 127 characters. The activation file
must be valid and stored on the device.
slot slot-number: Specifies the member ID of an IRF member device.
Usage guidelines
To install a license activation file successfully, make sure the SN and DID used for registering the
feature license matches the current SN and DID of the device.
You can install the activation files of multiple licenses for a feature. The feature can be used as long
as one of the licenses is valid.
Activation files are device locked. A licensed feature can run on the entire system even after an MPU
replacement.
Examples
# Install the activation file 20110812.ak to IRF member device 2.
<Sysname> system-view
[Sysname] license activation-file install flash:\license\20110812.ak slot 2
This operation might take some time. Do not perform any other operations until the operation
is completed or a failure message is displayed. Please wait...
Related commands
•
display license activation-file
•
display license device-id
•

license activation-file uninstall

license activation-file uninstall
Use license activation-file uninstall to uninstall an activation file.
Syntax
license activation-file uninstall file-name slot slot-number
Views
System view
Predefined user roles
network-admin
Parameters
file-name: Specifies the file name, a case-sensitive string of 1 to 127 characters. The activation file
must not be expired.
slot slot-number: Specifies the member ID of an IRF member device.
Usage guidelines
If the activation files for all licenses for a feature are uninstalled or expired, the feature is unavailable.
283