Display Command-Alias - H3C S5830V2 Command Reference Manual

Parameters
command: Specifies the keywords and arguments of a display command. To display available
keywords and arguments, enter display ?.
filename: Specifies the name of the file that is used to save the output, a string of 1 to 63 characters.
Usage guidelines
The display commands show the configuration, statistics, and states of the device. You can use
display >> to save the output to a file.
If the specified file does not exist, the system creates the file and saves the output to the file. If the file
already exists, the system appends the output to the end of the file.
Examples
# Append system time information to the end of the cpu.txt file.
<Sysname> display clock >> cpu.txt
# Check the content of the cpu.txt file.
<Sysname> more cpu.txt
Slot 1 CPU 0 CPU usage:
13% in last 5 seconds
13% in last 1 minute
13% in last 5 minutes
02:03:27 UTC Tue 01/01/2013

display command-alias

Use display command-alias to display the status of the command keyword alias function and the
configured command keyword alias.
Syntax
display command-alias
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display command keyword alias information.
<Sysname> display command-alias
Command alias is enabled
Index Alias
1 ping1
2 ssh1
Related commands
•
command-alias enable
•
command-alias mapping
Command key
ping
ssh
5