Ftp Ipv6 - H3C S5830V2 Command Reference Manual

Usages guidelines
If you execute this command multiple times, the most recent configuration takes effect.
The source address specified with the ftp command takes precedence over the source address
specified with the ftp client source command.
The source address specified with the ftp client source command applies to all FTP connections. The
source address specified with the ftp command applies only to the current FTP connection.
Examples
# Specify the source IPv4 address of 192.168.20.222 for outgoing FTP packets.
<Sysname> system-view
[Sysname] ftp client source ip 192.168.20.222
Related commands
ftp

ftp ipv6

Use ftp ipv6 to log in to an FTP server and enter FTP client view.
Syntax
ftp ipv6 [ ftp-server [ service-port ] [ vpn-instance vpn-instance-name ] [ dscp dscp-value | source
{ ipv6 source-ipv6-address | interface interface-type interface-number } ] * [ -i interface-type
interface-number ] ]
Views
User view
Predefined user roles
network-admin
Parameters
ftp-server: Specifies the IPv6 address or host name of an FTP server. A host name can be a
case-insensitive string of 1 to 253 characters. Valid characters for a host name include letters, digits,
hyphens (-), underscores (_), and dots (.).
service-port: Specifies the TCP port number of the FTP server, in the range of 0 to 65535. The
default value is 21.
dscp dscp-value: Specifies the DSCP value for IPv6 to use in outgoing FTP packets to indicate the
packet transmission priority. The value range is 0 to 63. The default is 0.
source { ipv6 source-ipv6-address | interface interface-type interface-number }: Specifies the
source address used to establish the FTP connection.
interface interface-type interface-number: Specifies an interface by its type and number. The
•
device will use the interface's IPv6 address as the source address. To establish the FTP
connection successfully, make sure the interface is up and is configured with an IPv6 address.
• ipv6 source-ipv6-address: Specifies an IPv6 address. To establish the FTP connection
successfully, make sure this address is the IPv6 address of an interface in up state on the
device.
vpn-instance vpn-instance-name: Specifies the VPN instance to which the FTP server belongs. The
vpn-instance-name argument is a case-sensitive string of 1 to 31 characters. If the FTP server
belongs to the public network, do not specify this option.
-i interface-type interface-number: Specifies an output interface by its type and number. This option
can be used only when the FTP server address is a link local address and the specified output
88