Display Current-Configuration Diff - H3C S5830V2 Command Reference Manual

Usage guidelines
Use this command to verify the configuration you have made.
If the system has automatically changed the setting you have made for a parameter, this command
displays the effective setting instead of the configured one. An automatic change typically occurs
because of system restrictions.
Typically, this command does not display parameters that are using the default settings.
Examples
# Display local user configuration.
<Sysname> display current-configuration configuration local-user
#
local-user ftp
password hash
$h$6$4UDOXMkpPwLyMwIX$ohXVbEb+YPMceuyB1A9k+MBoylujMQSAedf+fskEIkYFqcIBXvAqvdbzgqFK2az
da3BAtLeHakQe9hepn8ejsA==
service-type ftp
authorization-attribute user-role network-operator
#
local-user root
password hash
$h$6$zSWYxJ3Oj01iR7x1$a5BIEHfcqTUKrVkd6HB9vVLh8abWLm9sy/FW8J0ypdnqtH/Du6IU+9UlM8W5OM+
ihHJAWXUkTEAoMuJKBwcogw==
service-type ssh telnet terminal
authorization-attribute user-role network-admin
#
return
# Display Ethernet interface configuration.
<Sysname> display current-configuration interface ten-gigabitethernet 1/0/1
#
interface Ten-GigabitEthernet1/0/1
port link-mode route
#
return

display current-configuration diff

Use display current-configuration diff to display the configuration differences between the
running configuration and the next-startup configuration file.
Syntax
display current-configuration diff
Views
Any view
Predefined user roles
network-admin
network-operator
143