Rack-Mounting By Using Front Mounting Brackets And Long Or Super-Short Slide Rails - H3C S6812 Series Installation Manual

Figure2-18 Mounting the switch in the rack (with the wide flange of the mounting brackets
outside the rack)
Rack-mounting by using front mounting brackets and long or
super-short slide rails
Attaching the chassis rails to the chassis
1. Place the wide flange of the mounting bracket against the chassis side panel. Align the
mounting bracket installation holes with the appropriate screw holes in the chassis. Use the
provided M4 screws to attach the mounting bracket to the chassis.
2. Place the chassis rail against the chassis side panel. Align the chassis rail installation holes with
the screw holes. Use the provided M4 screws to attach the chassis rail to the chassis. See
Figure2-19
You can use super-short slide rails and long chassis rails to rack-mount the switch. Based on
the rack depth, install the long chassis rails with the chassis rails not reaching out of the chassis,
as shown in
as shown in
to Figure2-24.
Figure2-20 through Figure2-23
Figure2-21 through Figure2-24.
or with the chassis rails reaching out of the chassis,
2-17