Display Install Committed - H3C S5830V2 Command Reference Manual

Usage guidelines
Backup startup images are used only when the main boot or system image is missing or corrupt. For
more information, see Fundamental Configuration Guide.
To modify the backup startup image list, you must use the boot-loader file command.
Examples
# Display the backup startup software images.
<Sysname> display install backup
Backup startup software images on slot 1:
flash:/boot-a0201.bin
flash:/system-a0201.bin
# Display detailed information about backup startup software images.
<Sysname> display install backup verbose
Backup startup software images on slot 1:
flash:/boot-a0201.bin
[Package]
Vendor: H3C
Product: xxxx
Service name: boot
Platform version: 7.1.022
Product version: Beta 1330
Supported board: mpu
[Component]
Component: boot
Description: boot package
flash:/system-a0201.bin
[Package]
Vendor: H3C
Product: xxxx
Service name: system
Platform version: 7.1.022
Product version: Beta 1330
Supported board: mpu
[Component]
Component: system
Description: system package
For command output descriptions, see
Related commands
•
boot-loader file
•

display install committed

display install committed
Use display install committed to display main startup software images.
Syntax
display install committed [ slot slot-number ] [ verbose ]
Table 23.
168