Tftp-Server Ipv6 Acl - H3C S5830V2 Command Reference Manual

Usages guidelines
You can use an ACL to deny or permit the device's access to specific TFTP servers.
Examples
# Allow the device to access only the TFTP server at 1.1.1.1.
<Sysname> System-view
[Sysname] acl number 2000
[Sysname-acl-basic-2000] rule permit source 1.1.1.1 0
[Sysname-acl-basic-2000] quit
[Sysname] tftp-server acl 2000

tftp-server ipv6 acl

Use tftp-server ipv6 acl to use an ACL to control the device's access to TFTP servers in an IPv6
network.
Use undo tftp-server ipv6 acl to restore the default.
Syntax
tftp-server ipv6 acl acl-number
undo tftp-server ipv6 acl
Default
No ACL is used to control the device's access to TFTP servers.
Views
System view
Predefined user roles
network-admin
Parameters
acl-number: Specifies the number of a basic ACL, in the range of 2000 to 2999.
Usages guidelines
You can use an ACL to deny or permit the device's access to specific TFTP servers.
Examples
# Allow the device to access only the TFTP server at 2001::1.
<Sysname> System-view
[Sysname] acl ipv6 number 2001
[Sysname-acl6-basic-2001] rule permit source 2001::1/128
[Sysname-acl6-basic-2001] quit
[Sysname] tftp-server ipv6 acl 2001
112