Ftp Client Source - H3C S5830V2 Command Reference Manual

Predefined user roles
network-admin
Parameters
interface interface-type interface-number: Specifies an interface by its type and number. The device
will use the interface's IPv6 address as the source address. For successful FTP packet transmission,
make sure the interface is up and is configured with an IPv6 address.
ipv6 source-ipv6-address: Specifies an IPv6 address. For successful FTP packet transmission,
make sure this address is the IPv6 address of an interface in up state on the device.
Usages guidelines
If you execute this command multiple times, the most recent configuration takes effect.
The source address specified with the ftp ipv6 command takes precedence over the source address
specified with the ftp client ipv6 source command.
The source address specified with the ftp client ipv6 source command applies to all FTP
connections. The source address specified with the ftp ipv6 command applies only to the current
FTP connection.
Examples
# Specify the source IPv6 address of 2000::1 for outgoing FTP packets.
<Sysname> system–view
[Sysname] ftp client ipv6 source ipv6 2000::1
Related commands
ftp ipv6

ftp client source

Use ftp client source to specify the source IPv4 address for FTP packets sent to the IPv4 FTP
server.
Use undo ftp client source to restore the default.
Syntax
ftp client source { interface interface-type interface-number | ip source-ip-address }
undo ftp client source
Default
No source IPv4 address is specified for FTP packets sent to the IPv4 FTP server. The device uses
the primary IPv4 address of the output interface for the route to the server as the source address.
Views
System view
Predefined user roles
network-admin
Parameters
interface interface-type interface-number: Specifies an interface by its type and number. The device
will use the interface's primary IPv4 address as the source address. For successful FTP packet
transmission, make sure the interface is up and has the primary IPv4 address configured.
ip source-ip-address: Specifies an IPv4 address. For successful FTP packet transmission, make
sure this address is the IPv4 address of an interface in up state on the device.
87