Views
User view
Predefined user roles
network-admin
Usage guidelines
The device supports automatic rollback and manual rollback. This command performs a manual
rollback.
You can perform a manual rollback while an ISSU is in one of the following states:
•
Loaded.
•
Switching (during an upgrade to a compatible version).
•
Switchover (during an upgrade to a compatible version).
•
Accepted.
If you perform a manual rollback while an ISSU is in Loading state, the ISSU process ends without
changing the original software versions.
When an ISSU to an incompatible version is in Switching state, you cannot perform a manual
rollback.
When an ISSU is in Committing state, rollback is not supported.
If the IRF fabric has multiple members, a rollback performed after you execute the issu run
switchover command cancels all operations performed during the ISSU process, including the
master/subordinate switchover operation.
Examples
# Roll back to the original software versions.
<Sysname> issu rollback
This command will quit the ISSU process and roll back to the previous version. Continue?
[Y/N]:y
Related commands
•
issu accept
•
issu commit
•
issu load
•
issu run switchover
issu rollback-timer
Use issu rollback-timer to set the automatic rollback timer.
Use undo issu rollback-timer to restore the default.
Syntax
issu rollback-timer minutes
undo issu rollback-timer
Default
The automatic rollback interval is 45 minutes.
Views
System view
198